ICND1 v3.0 - Interconnecting Cisco Networking Devices, Part 1

Code: 4548

5 days

List Tuition : $3,595.00 USD

Course Overview

    Download PDF 

In this course, you will learn how to install, operate, configure, and verify a basic IPv4 and IPv6 network, including configuring a LAN switch, configuring an IP router, managing network devices, and identifying basic security threats. The goal of the course is to provide you with the knowledge and skills necessary to install, configure, and operate a small- to medium-sized network.

Now at version 3.0, Interconnecting Cisco Networking Devices, Part 1 (ICND1) v3.0 provides the foundational understanding of network Layers 1 through 3 that are applicable to core routing and switching plus other advanced technologies. Several topics have been added including; understanding the interactions and network functions of firewalls, wireless controllers and access points, along with additional focus on IPv6 and basic network security.

This course can be followed by Interconnecting Cisco Networking Devices, Part 2 (ICND2) v3.0, which covers topics in more depth and teaches you how to perform basic troubleshooting steps in enterprise branch office networks, preparing learners for the CCNA Routing and Switching certification.

This course will enable you to:

  • Prepare for the entry-level CCENT certification, which is the foundation for Cisco associate-level certifications and beyond
  • Obtain the foundational understanding of network layers 1-3 that are applicable to core routing and switching plus other advanced technologies
  • Develop basic routing and switching networking skills to configure, monitor, and troubleshoot Cisco networks for increased effectiveness and optimal performance within SMB settings
  • Understand the interactions and network functions of firewalls, wireless controllers and access points
    Support Cisco network deployments and maintain these services in an on-going operational network

Course exclusives:

  • To help with your success, you will receive a free ICND1 (200-105 ICND1) voucher

Lab time:

  • 60 hours total over 180 days
  • Labs are one to one and on Virtual Machines
  • Be sure to logout of labs during class. Any remaining lab time can be used after class for additional practice

  • Network administrators
  • Network support engineers
  • Network engineer associate
  • Network specialist
  • Network analyst
  • Cisco channel partners
  • Individuals pursing the CCNA Routing and Switching certification
  1. Building a Simple Network

    • Functions of Networking
    • Host-to-Host Communications Model
    • Introducing LANs
    • Operating Cisco IOS Software
    • Starting a Switch
    • Ethernet and Switch Operation
    • Troubleshooting Common Switch Media Issues
  2. Establishing Internet Connectivity

    • TCP/IP Internet Layer
    • IP Addressing and Subnets
    • TCP/IP Transport Layer
    • Functions of Routing
    • Configuring a Cisco Router
    • Packet Delivery Process
    • Enabling Static Routing
    • Basics of ACL
    • Enabling Internet Connectivity
  3. Summary Challenge

    • Establish Internet Connectivity
    • Troubleshoot Internet Connectivity
  4. Building a Medium-Sized Network

    • Implementing VLANs and Trunks
    • Routing Between VLANs
    • Using a Cisco IOS Network Device as a DHCP Server
    • Implementing RIPv2
  5. Network Device Management and Security

    • Securing Administrative Access
    • Implementing Device Hardening
    • Configuring System Message Logging
    • Managing Cisco Devices
    • Licensing
  6. Summary Challenge

    • Implementing a Medium-Sized Network
    • Troubleshooting a Medium-Sized Network
  7. Introducing IPv6

    • Introducing Basic IPv6
    • IPv6 Operation
    • Configuring IPv6 Static Routes

Classroom Live Labs

Discovery Lab 1: Get Started with Cisco CLI
Discovery Lab 2: Perform Basic Switch Configuration
Discovery Lab 3: Observe How a Switch Operates
Discovery Lab 4: Troubleshoot Switch Media and Port Issues
Discovery Lab 5: Inspect TCP/IP Applications
Discovery Lab 6: Start with Cisco Router Configuration
Discovery Lab 7: Configure Cisco Discovery Protocol
Discovery Lab 8: Configure Default Gateway
Discovery Lab 9: Exploration of Packet Forwarding
Discovery Lab 10: Configure and Verify Static Routes
Discovery Lab 11: Configure and Verify ACLs
Discovery Lab 12: Configure a Provider-Assigned IP Address
Discovery Lab 13: Configure Static NAT
Discovery Lab 14: Configure Dynamic NAT and PAT
Discovery Lab 15: Troubleshoot NAT
Discovery Lab 16: Configure VLAN and Trunk
Discovery Lab 17: Configure a Router on a Stick
Discovery Lab 18: Configure a Cisco Router as a DHCP Server
Discovery Lab 19: Troubleshoot DHCP Issues
Discovery Lab 20: Configure and Verify RIPv2
Discovery Lab 21: Troubleshoot RIPv2
Discovery Lab 22: Enhance Security of Initial Configuration
Discovery Lab 23: Limit Remote Access Connectivity
Discovery Lab 24: Configure and Verify Port Security
Discovery Lab 25: Configure and Verify NTP
Discovery Lab 26: Configure Syslog
Discovery Lab 27: Configure Basic IPv6 Connectivity
Discovery Lab 28: Configure IPv6 Static Routes

Challenge Lab 1: Implementing the Initial Switch Configuration
Challenge Lab 2: Implementing the Initial Router Configuration
Challenge Lab 3: Implementing Static Routing
Challenge Lab 5: Implementing PAT
Challenge Lab 6: Summary
Challenge Lab 7: Summary Challenge
Challenge Lab 8: Troubleshooting VLANs and Trunk
Challenge Lab 9: Implement Multiple VLANs and Basic Routing Between the VLANs
Challenge Lab 10: Implementing a DHCP Server in on a Cisco IOS Device
Challenge Lab 11: Implementing RIPv2
Challenge Lab 12: Securing Device Administrative Access
Challenge Lab 13: Implementing Device Hardening
Challenge Lab 14: Configuring System Message Logging
Challenge Lab 15: Summary Challenge Lab: 3
Challenge Lab 16: Summary Challenge Lab: 4
Challenge Lab 17: Implement IPv6 Static Routing

Request a Discounted Quote

Bring Training to You

Request schedule for this course

Request a Quote for this Class

We provide government and government contractor discounts, please request a quote


total option: 0

Hotel and Travel can be included on your quote.
For immediate response, you can call 1-855-515-2170 or we will provide a quote within 4 business hours. Travel must be booked 14 days before training for rate to apply.

Learn How to Become a Managed Learning Member

Request a Quote

Thank you for requesting a quote, we will be in touch shortly with a quote. If you need immediate assistance, please call 855-515-2170.

Request Other Date

Request date or location you need

Don’t see the date or location you need? Contact us and let us know, we are adding dates and locations daily.